How to Change the Motherboard in a Laptop

The motherboard is the most important part of any computer. It holds all major devices that enable the appropriate contact with each other. The motherboard also called the board of directors or the main system board, and if you are using an Apple computer, then you must use logic board term. In short form, as is the MOBO known.

Before the arrival of the latest motherboard design in the picture, use your computer cases of card cage so-called big as all the slots and sockets available for connection. Then, with the high-performance computers, comes the age of the new motherboards.

Replace the painting is a very tedious task, and one should be careful while replacing or changing the motherboard. It is required to majorly If the previous motherboard or you are upgrading a motherboard failure. Upgradation requires mainly in laptops and personal computers. It is very difficult to find the correct motherboard components of current hardware on your laptop, but you can always take help from the manufacturer.

Once you've got the correct motherboard devices your laptop, you can follow the steps below to replace the motherboard on your laptop:

Step 1:

Find evidence for the devices your laptop and go though the instructions for replacing hardware components such as CD / DVD drive and hard disk drive. You must be very careful while removing these components of your laptop.

Step 2:

The first step will be to turn off the laptop and remove the battery and the power cord. Now close the laptop lid and put the laptop upside down on a clean area.

Step3:

Now use a screw driver to remove the optical drive, hard drive and RAM of the laptop. You can take the help of a guide to use to remove all of these components of your system.

Step 4:

Remove bullets wireless antenna, if you have one and remove the wireless network card. Now open the access door to the processor and remove the processor a full range of mobile computers.

Step 5:

Now you have to take out all the screws from the bottom of the device that holds the case, but be sure not to remove any screw that holds any of the LED. Open the case carefully as you may break some of the clips hidden. You may also need to raise or remove the case before removing the motherboard.

Step 6:

Now remove all the wires that are connected to the motherboard. Remove cards such as audio, video and unscrews mounting screws.

Step 7:

Once in the old motherboard is removed, put a new motherboard and connect all devices back.

These steps are very similar to most of the manufacturer's manuals, but you must always consult the user manual before removing any device from your laptop. If you do not learn with the hardware components, you should take help or advice from an expert.

 

Esanyog is the best laptop service provider in pune.Chip Level motherboard repairing in pune and pimpri chinchwad...